Back to Top
Tech Select® is a design support tool that provides access to all electrical and mechanical parameters for ATC products. Included are Smith charts, S- Parameters, RF current and voltage, ESR, Q, impedances and more. RF parameters can be achieved at frequencies entered by the user. By selecting and sorting on the most critical parameters this program generates a complete list of product options with part numbers. View and print datasheets for the selected products. Download size is 8.9 MB.
Operating System Requirements: Windows XP, Vista or Windows 7Download Application
Scattering parameters of ATC 100 Series A and B, 180 R, 700 Series A and B, and 500 S Capacitors measured in vertical orientation on Alumina. README file provides details on measurement conditions. Last updated 10/31/00.Download Application
Scattering parameters of ATC 600L Series Ultra-Low ESR Capacitors measured in horizontal and vertical orientation on Rogers R04350 softboard. README file provides details on measurement conditions. Last updated 1/12/06.Download Application Measurements made in horizontal orientation
Scattering parameters of ATC 600S Series Ultra-Low ESR Capacitors measured in horizontal and vertical orientation on Rogers R04350 softboard. README file provides details on measurement conditions. Last updated 1/12/06.Download Application Measurements made in horizontal orientation
Scattering parameters of ATC 600F Series Ultra-Low ESR Capacitors measured in horizontal and vertical orientation on Rogers R04350 softboard. README file provides details on measurement conditions. Last updated 1/12/06.Download Application Measurements made in horizontal orientation
Scattering parameters of ATC WL Series Chip Inductors measured in horizontal orientation on Rogers R04350 softboard. README file provides details on measurement conditions. Last updated 8/9/07
1/11/11. Measured on 10-mil thick Rogers R04350 microstrip board.Download Application
12/12/11. Measured on 10-mil thick Rogers RO3006microstrip board, with the device under test subtending a 10 mil gap in a 13.4 mil-wide center trace (nominal 50-ohm characteristic impedence).Download Application
5/22/08. Measured on 10-mil thick Rogers R04350 microstrip board.Download Application
5/22/08. Measured on 10-mil thick Rogers R04350 microstrip board.
Download Application
Scattering parameters of ATC 800 A Series Ultra-Low ESR Capacitors measured in horizontal and vertical orientation on Rogers R04350 softboard. README file provides details on measurement conditions. Last updated 12/18/08.Download Application Measurements made in horizontal orientation
Scattering parameters of ATC 800 B Series Ultra-Low ESR Capacitors measured in vertical orientation on Rogers R04350 softboard. README file provides details on measurement conditions. Last updated 8/5/08.Download Application Measurements made in vertical orientation
Scattering parameters of ATC 800 R Series Ultra-Low ESR Capacitors measured in horizontal orientation on Rogers TMM3 softboard. README file provides details on measurement conditions. Last updated 8/31/09.Download Application Measurements made in horizontal orientation
These measurement-based models, available for selected ATC components, are both substrate and part-value scalable, and represent high-order resonant effects and accurate effective series resistance. Each model includes complete documentation detailing the test fixtures used, measurement conditions, range of validity, and model-to-measurement data comparisons.Link to Modelithics Global Models™
All testing performed on 10-mil-thick Rogers RO4350 microstrip board, with the UBL leads connected between the microstrip trace and under the ground plane (nominal 50-ohm characteristic impedance).
Home | About Us | Terms of Use | Safe Harbor | Privacy Policy | Sales | Site Map | Contact Us
ATC is an ISO 9001 Registered Company. © American Technical Ceramics Corp. All Rights Reserved